考试首页 | 考试用书 | 培训课程 | 模拟考场 | 考试论坛  
全国  |             |          |          |          |          |         
  当前位置:计算机等级 > 四级考试 > 网络工程师 > 文章内容
  

2008年9月全国计算机等级考试四级网络工程师真题

中华IT学院   【 】  [ 2016年8月29日 ]

  二、综合题

  1、计算并填写下表

  2、某单位的办公网和商务网通过路由器R1、R2、R3与Internet相连,网络连接和IP分配如图所示,该单位要求通过RIP路由协议使办公网和商务网之间能够相互通信,并能访问Internet。

  根据以下R1的配置信息,并补充【6】-【10】空白处的配置命令或参数,按题目要求给出正确的R1配置。

  Router>enable

  Router#

  Router#configure terminal

  Router(config)#

  Router(config)#hostname R1

  R1(config)#interface f0/1

  R1(config-if)#ip address 202.206.16.1 255.255.255.0

  R1(config-if)#no shutdown

  R1(config-if)#interface f0/2

  R1(config-if)#ip address 202.206.17.1 255.255.255.0

  R1(config-if)#no shutdown

  R1(config-if)#exit

  R1(config)#

  R:(config)#interface s1

  R1(config-if)#ip address 202.112.41.144 255.255.255.252

  R1(config-if)#tandwidth 【6】 配置带宽为2.04Mbps

  R1(config-if)# 【7】 PPP 封装PPP协议

  R1(config-if)#no shutdown

  R1(config-if)#exit

  R1(config)#iproute 【8】 配置缺省路由

  R1(config)#routenrip

  R1(config-mote)#retwork 【9】 配置参与RIP的网络

  R1(config-mote)#retwork 【10】 配置参与RIP的网络

  R1(config-router)#end

  R1#write

  R1#

分享到:
本文纠错】【告诉好友】【打印此文】【返回顶部
将考试网添加到收藏夹 | 每次上网自动访问考试网 | 复制本页地址,传给QQ/MSN上的好友 | 申请链接 | 意见留言 TOP
关于本站  网站声明  广告服务  联系方式  站内导航  考试论坛
Copyright © 2007-2013 中华考试网(Examw.com) All Rights Reserved